Deskripsi
SACS is an integrated suite of software that supports the analysis, design, fabrication, and installation of offshore structures, including oil, gas, and wind farm platforms and topsides. Its ability to dynamically iterate designs allows users to perform advanced analysis, comply with offshore design criteria and visualize complex results.
SACS provides offshore engineers with comprehensive analysis and design capabilities that improve infrastructure operational safety and minimize risk and ensure compliance for a broad range of structures. It is proficient in specialized analyses important to any offshore project, including: non-linear structural analysis; dynamic response analysis due to wind, current, waves, and seismic loads; analysis for impact effects; and special high-end analysis for severe accidental loadings such as dynamic blast, ship impact, and structural collapse. SACS can model tubular jacket structures, foundations, spars, and topsides, as well as perform detailed fatigue life calculations.
This course will review the fundamentals behind offshore structures with the overall objective to provide participants with an understanding of the design and construction of offshore structure using Structural Analysis Computer System (SACS) software. SACS is the most comprehensive design and analysis package offered to both the offshore and civil engineering industries. Participants are expected to have basic structural design engineering knowledge.
Training offshore structural analysis using sacs ini memerlukan pendalaman materi yang komprehensif dan terupdate, oleh karenanya dibutuhkan training provider yang dapat menyediakan training analisis struktur lepas pantai menggunakan sacs sesuai dengan kebutuhan peserta.
Tujuan Pelatihan
Dengan mengikuti training offshore structural analysis, maka diharapkan :
- Precede (including Axis systems, model generation using the in-built option, joint Offsetting, environmental cards, equipment/dead load generations, types of Elements and usage, 3D viewing, etc), gap elements.
- Performing the Inplace Analysis, Lift analysis based on the model that has been created. Loading & Combinations. Also, understand the various factors to be considered for doing the Inplace analysis & also the calculation of the COG shift for conducting the Lift analysis. Pile Soil interaction(PSI).
- Dynamic analysis. Jacket natural frequency, wave dynamics(1/2 day) and basic floatation studies (reserve buoyancy, launch and upending(1/2day), exposure to Transportation.
- Earthquake analysis, Jacket spectral fatigue analysis/exposuredeterministicfatigue & wind fatigue.
- Collapse and boat impact
Outline Materi
Modul pelatihan secara umum adalah sebagai berikut.
- Offshore Structure.
- SACS Modeling.
- Topsides Components : Deck, Cellar Deck, Mezzanine, Drain, Flare Booms, Helideck Design etc.
- Loading in SACS : Structure Dead Load, Equipment Loads, Crane Loads, Drilling Loads, Helicopter Loads, Wave and Current Loads, Pre Service Load etc.
- Analysis : Inplace Analysis, Load out Analysis, Lifting Analysis, Transportation Analysis, Launch Analysis, Seismic Analysis, Collapse Analysis etc.
Instruktur :
Instruktur yang akan mengajar pelatihan analisis struktur lepas pantai menggunakan sacs ini berasal dari praktisi yang sudah berpengalaman di bidangnya, dan atau akademisi yang berpengalaman menjadi konsultan di banyak perusahaan besar.
Metode Training :
Pelatihan offshore structural analysis ini dapat diselenggarakan dengan cara tatap muka / offline maupun online / daring
Lokasi :
Beberapa kota tempat pelatihan analisis struktur lepas pantai antara lain : Jakarta, Yogyakarta, Bandung dan Bali
Jadwal pelatihan training-industrisipil.com 2026 :
Batch 1 : 03 – 04 Januari 2026 | 16 – 17 Januari 2026 || Batch 2 : 06 – 07 Februari 2026 | 20 – 21 Februari 2026 || Batch 3 : 05 – 06 Maret 2026 | 19 – 20 Maret 2026
Batch 4 : 03 – 04 April 2026 | 23 – 24 April 2026 || Batch 5 : 07 – 08 Mei 2026 | 21 – 22 Mei 2026 || Batch 6 : 05 – 06 Juni 2026 | 25 – 26 Juni 2026
Batch 7 : 09 – 10 Juli 2026 | 23 – 24 Juli 2026 || Batch 8 : 06 – 07 Agustus 2026 | 20 – 21 Agustus 2026 || Batch 9 : 04 – 05 September 2026 | 18 – 19 September 2026
Batch 10 : 08 – 09 Oktober 2026 | 22 – 23 Oktober 2026 || Batch 11 : 06 – 07 November 2026 | 26 – 27 November 2026 || Batch 12 : 04 – 05 Desember 2026 | 18 – 19 Desember 2026
Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta training
Invetasi dan Lokasi pelatihan
· Yogyakarta, Hotel 101 (6.500.000 IDR / participant)
· Jakarta, Hotel Amaris Kemang (6.500.000 IDR / participant)
· Bandung, Hotel Neo Dipatiukur (6.500.000 IDR / participant)
· Bali, Hotel Ibis Kuta(7.500.000 IDR / participant)
· Surabaya, Hotel Amaris, Ibis Style (6.000.000 IDR / participant)
· Lombok, Sentosa Resort (7.500.000 IDR / participant)
Catatan : Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.
Fasilitas :
FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
FREE Akomodasi ke tempat pelatihan bagi peserta training
Module / Handout training
FREE Flashdisk
Sertifikat training
FREE Bag or bagpackers (Tas Training)
Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
2xCoffe Break & 1 Lunch, Dinner
FREE Souvenir Exclusive
Training room full AC and Multimedia
